91福利在线观看-91福利在线视频-91干逼-91干逼网-91高端-91高清国产

Injection molding

Used in the production of daily necessities. Complex central systems or individual devices for a wide range of applications, e.g. in the automotive industry, electronics, household goods, medical technology, etc.; Can be used in a clean plant environment.


Plastics are injection molded and processed into molded parts. The process is intermittent and goes through multiple stages. The raw material (usually a thermoplastic) is loaded into a cylinder, plasticized with a screw and mixed into a homogeneous lump. This is followed by metering and high-pressure processing and intracavity molding in so-called "injection molds". The whole piece of material is cooled and then cast – the injection moulding tool opens and the molded part is cast.


Before forming, the material must be sufficiently dried. For materials containing water, water vapor will enter the mold cavity with the melted glue after melting, so that the surface of the finished product will have silver bar defects, and the forming is not easy to control. Some materials even react with water at high temperatures, and water decomposition occurs, at which time the performance of the material will deteriorate.


The pre-drying of raw materials has a significant impact on the quality of injection molded products, which can prevent undesirable phenomena such as silver wire, bubbles, blurring, and poor air permeability in finished products; In addition, the stability of production work and the effect of preheating can be obtained (the barrel temperature can be reduced, and the molding cycle can be shortened).


Especially for engineering plastics, it can improve the surface gloss, improve bending strength and tensile strength, avoid internal cracks and bubbles, improve plasticizing capacity and shorten the molding cycle.


The effect of moisture content on plastic products

The presence of plastic moisture will usually have a harmful effect on the performance of plastics and molding processing, and water will vaporize at high temperatures, so that products produce bubbles, spray marks, surface silver filaments and other defects, so plastic moisture content is an important factor affecting the processing technology of plastics, product appearance and product characteristics, drying links can not be ignored.

Drying technology of JinMachine

The dew point of the dehumidifier can reach -70 °C, shorten the drying time, improve the drying efficiency, and the residual moisture content can be less than 20ppm.


Domestic dryer with SCADA technology, remote control, adjustment of technical parameters according to the actual situation, online detection, and prediction of faults in advance.


Dew point switching technology can set different dew points according to the drying requirements of different materials, minimizing energy consumption.


Compared with the same output of honeycomb dehumidifier, Jinyue molecular sieve dehumidifier saves 18%-60% in energy consumption. (This is based on thousands of experimental reports and feedback from customers, testing real data)


Compared with the Jinyue standard molecular sieve dehumidifier, the Jinyue modular dehumidification dryer saves about 25% energy consumption.

Production traceabilityRemote after-sales serviceAnticipate failuresDew point switchingEnergy consumption detectionModular design
Restore production information, real report assured and reliable information real-time feedback.The system automatically and manually analyzes to solve problems in a targeted manner.Dozens of detection points, real-time detection, data abnormality, timely feedback, key locations, alarm reminders.The minimum dew point reaches -70°C, and the dew point can be set flexibly, which is energy-saving and efficient.Each device is equipped with electricity meters, mobile phones, computers, and equipment can be observed at the same time.Multiple identical module dryers that work independently and do not affect each other. Multiple modules share an independent electronic control system, using Profinet communication, quickly connect to form a system.




Contact
Address: No. 23, Group 1, Rice and Wheat Seed Farm, Leyu Town, Zhangjiagang, Jiangsu
Tel: 0512-58668508
Follow:

Copyright 2019-2021 JIN MACHINE  某ICP備00000000號-1

  • Home
  • Tel
  • Top
  • 主站蜘蛛池模板: 成人aⅴ免费视频在线观看 成人aⅴ片一区二区三区 | FREEZEFRAME丰满老妇 | 18禁免费无码无遮挡不卡网站 | 国产成人欧美日韩在线电影 | 国产裸体舞一区二区三区 | 国产无套水多 | 亚洲精品AV中文字幕在线 | 国产又黄又爽又色的免费 | 人禽伦交小说 | 一区二区三区欧美 | 国产欧美国日产高清 | 51精品视频全部免费的意义 | 91精品国产高清片久久久久久 | 九九热精品免费观看 | a级a做爰片在线观看视频动漫电视剧在线观看 | 韩国漂亮老师做爰BD | 久久精品视频日本国产精品亚洲一区二区麻豆 | 激情爆乳一区二区三区 | 国产在线无码视频一区二区三区 | 丰满人妻熟妇乱又伦精品视频三 | 亚洲另类自拍丝袜第五页 | 亚洲乱码一二三四区麻 | 成人黄色视频网址大全 | 国产精品久久久久久久成人午夜 | 91久久精品日日躁夜夜躁欧 | 亚洲天堂v| 国产麻豆日韩欧美 | 激情做人爱视频在线观看 | 成人3dh动漫在线播 成人3d动漫一区二 成人3d动漫在线观看 | 天天日天天干天天操天天射 | 中文字幕视频二区人妻 | 日本不卡一区二区三区 | 亚洲av日韩精品久久久久久大 | 熟女俱乐部五十路 | 秋霞电影网视频一区二区三区香港韩国日本三级 | a级毛片免费看久久 | 欧美视频在线免费观看 | 日本黄色一级网站 | 福利姬自曝n裤被偷 | 国产精品女同一区二区久久夜 | 国产亚洲精品AAAA片小说 |